Drizoro - Concreseal thin layer mortar - 1
Price on request
discount price
net unit price
9,74zł for kg
minimum trading quantity
the amount of product
29.00 kg
total price
net list price
306,82zł
for 29.00 kg
total price
discounted net price
282,46zł
for 29.00 kg
price-list
gross unit price 13,01zł
for kg
discount price
gross unit price
11,98zł
for kg
minimum trading quantity
the amount of product
29.00 kg
total price
gross list price
377,39zł
for 29.00 kg
total price
gross discount price
347,43zł
for 29.00 kg
Product description
Two-component mortar based on microcement and synthetic acrylic resin, especially recommended for creating a smooth finishing and decorative coating of low thickness or sharp. It is characterized by great abrasion resistance and resistance to weather conditions.
Features
- creates an uninterrupted smooth leveling film with no joints or seams on walls and floors
- good adhesion to many different substrates: concrete, mortar, ceramic tiles, etc.
- does not require priming
- very good resistance to abrasion and weather conditions
- suitable for use under water immersion
- very low water absorption: suitable for humid places such as kitchens or bathrooms
- easy and clean material for application
- allows diffusion and water vapor permeability
Application
- decorative finish smoothing and sealing mortar in exterior and interior applications
- smooth decorative finish of Maxseal or Maxseal Flex waterproofing coatings in swimming pools, ponds, artificial lakes, etc.
Technical data
- external appearance and color of component A - white, milky liquid
- external appearance and color of component B gray or white powder
- specific gravity of component A (liquid) at 20 ° C and 50% relative humidity 1.00 0.10 g / cm 3
- specific gravity of component B (powder) at 20 ° C and 0.90 0.10 g / cm 3 relative humidity
- weight ratio of the component in A: B in the mix: 9:20
- minimum application temperature of substrate and surroundings> 5 ° C
- Shelf life of the A + B mix at 20 C and 50% relative humidity approx. 20–30 min
- time interval between the application of successive layers at a temperature of 20 C and a relative humidity of 50%> 30 min
- setting time at 20 ° C and 50% relative humidity 3–4 h
- maturing time before putting into service for pedestrian traffic at 20 ° C and 50% relative humidity 24 hours
- compressive strength after 28 days> 45 MPa (according to EN 12190)
- adhesion to concrete after 28 days> 1.5 MPa (according to EN 1542)
- layer thickness 0.20-0.25 mm
- consumption per one layer / total 0.20–0.25 / 0.4–0.5 kg / m 2
- package 29 kg
Technical data